IEC 61000 EMC 시험 규격

IEC 61000-4-2 : 정전기방전 내성 시험

IEC 61000-4-3 : 방사성 RF 전자기장 내성 시험

IEC 61000-4-4 : EFT 시험

IEC 61000-4-5 : 서지 내성 시험

IEC 61000-4-6 : 전도성 RF 전자기장 내성 시험

IEC 61000-4-8 : 전원 주파수 자기장 내성 시험

IEC 61000-4-11 : 전압 강하 및 순간 정전 내성 시험

 

IEC TR 61000-4-1 

Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of immunity tests (IEC 61000-4 series)

 

LF conducted disturbances

IEC 61000-4-11 

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

 

IEC 61000-4-13

Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

 

IEC 61000-4-14

Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

 

IEC 61000-4-16

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

 

IEC 61000-4-17

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

 

IEC 61000-4-27

Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

 

IEC 61000-4-28

Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

 

IEC 61000-4-29

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity test

 

IEC 61000-4-30

Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

 

IEC 61000-4-34

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

 

IEC TR 61000-4-38

Electromagnetic compatibility (EMC) - Part 4-38: Testing and measurement techniques - Test, verification and calibration protocol for fluctuation and flicker compliance test systems

 

LF radiated disturbances

IEC 61000-4-8

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

 

HF conducted disturbances

IEC 61000-4-4

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

 

IEC TR 61000-4-5

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

 

IEC TR 61000-4-6

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

 

IEC TR 61000-4-12

Electromagnetic compatibility (EMC) - Part 1-5: General - High power electromagnetic (HPEM) effects on civil systems

 

IEC 61000-4-18

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

 

IEC 61000-4-19

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2kHz to 150 kHz at AC power ports

 

HF radiated disturbances

IEC 61000-4-3

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

 

IEC 61000-4-9

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test

 

IEC 61000-4-10

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

 

IEC 61000-4-20

Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides

 

IEC 61000-4-21

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber methods

 

IEC 61000-4-22

Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Radiated emissions and immunity measurements in fully anechoic rooms (FARs)

 

Electrostatic discharges (ESD)

IEC 61000-4-2

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

 

HEMP (High-altitude Electromagnetic Pulse)

HEMP는 고고도에서 정전기, 낙뢰, 핵폭탄의 폭발 등으로 발생하는 전자기파를 의미한다.

IEC 61000-4-23

Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances

 

IEC 61000-4-24

Electromagnetic compatibility (EMC) - Part 4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance

 

IEC 61000-4-25

Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems

 

IEC 61000-4-32

Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium

 

IEC 61000-4-33

Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters

 

IEC 61000-4-35

Electromagnetic compatibility (EMC) - Part 4-35: Testing and measurement techniques - High Power Electromagnetic HEMP transient simulator compendium

 

IEC 61000-4-36

Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems

 

https://www.iec.ch/emc/basic_emc/basic_emc_immunity.htm