lwIP에서 pcb는 tcp.h에 정의되어 있다. pcb는 protocol control block이라는 뜻이다.
tcp_pcb 구조체 변수는 다음과 같다.
/** the TCP protocol control block */
struct tcp_pcb {
/** common PCB members */
IP_PCB;
/** protocol specific PCB members */
TCP_PCB_COMMON(struct tcp_pcb);
/* ports are in host byte order */
u16_t remote_port;
tcpflags_t flags;
#define TF_ACK_DELAY 0x01U /* Delayed ACK. */
#define TF_ACK_NOW 0x02U /* Immediate ACK. */
#define TF_INFR 0x04U /* In fast recovery. */
#define TF_CLOSEPEND 0x08U /* If this is set, tcp_close failed to enqueue the FIN (retried in tcp_tmr) */
#define TF_RXCLOSED 0x10U /* rx closed by tcp_shutdown */
#define TF_FIN 0x20U /* Connection was closed locally (FIN segment enqueued). */
#define TF_NODELAY 0x40U /* Disable Nagle algorithm */
#define TF_NAGLEMEMERR 0x80U /* nagle enabled, memerr, try to output to prevent delayed ACK to happen */
#if LWIP_WND_SCALE
#define TF_WND_SCALE 0x0100U /* Window Scale option enabled */
#endif
#if TCP_LISTEN_BACKLOG
#define TF_BACKLOGPEND 0x0200U /* If this is set, a connection pcb has increased the backlog on its listener */
#endif
#if LWIP_TCP_TIMESTAMPS
#define TF_TIMESTAMP 0x0400U /* Timestamp option enabled */
#endif
/* the rest of the fields are in host byte order
as we have to do some math with them */
/* Timers */
u8_t polltmr, pollinterval;
u8_t last_timer;
u32_t tmr;
/* receiver variables */
u32_t rcv_nxt; /* next seqno expected */
tcpwnd_size_t rcv_wnd; /* receiver window available */
tcpwnd_size_t rcv_ann_wnd; /* receiver window to announce */
u32_t rcv_ann_right_edge; /* announced right edge of window */
/* Retransmission timer. */
s16_t rtime;
u16_t mss; /* maximum segment size */
/* RTT (round trip time) estimation variables */
u32_t rttest; /* RTT estimate in 500ms ticks */
u32_t rtseq; /* sequence number being timed */
s16_t sa, sv; /* @todo document this */
s16_t rto; /* retransmission time-out */
u8_t nrtx; /* number of retransmissions */
/* fast retransmit/recovery */
u8_t dupacks;
u32_t lastack; /* Highest acknowledged seqno. */
/* congestion avoidance/control variables */
tcpwnd_size_t cwnd;
tcpwnd_size_t ssthresh;
/* sender variables */
u32_t snd_nxt; /* next new seqno to be sent */
u32_t snd_wl1, snd_wl2; /* Sequence and acknowledgement numbers of last
window update. */
u32_t snd_lbb; /* Sequence number of next byte to be buffered. */
tcpwnd_size_t snd_wnd; /* sender window */
tcpwnd_size_t snd_wnd_max; /* the maximum sender window announced by the remote host */
tcpwnd_size_t snd_buf; /* Available buffer space for sending (in bytes). */
#define TCP_SNDQUEUELEN_OVERFLOW (0xffffU-3)
u16_t snd_queuelen; /* Number of pbufs currently in the send buffer. */
#if TCP_OVERSIZE
/* Extra bytes available at the end of the last pbuf in unsent. */
u16_t unsent_oversize;
#endif /* TCP_OVERSIZE */
/* These are ordered by sequence number: */
struct tcp_seg *unsent; /* Unsent (queued) segments. */
struct tcp_seg *unacked; /* Sent but unacknowledged segments. */
#if TCP_QUEUE_OOSEQ
struct tcp_seg *ooseq; /* Received out of sequence segments. */
#endif /* TCP_QUEUE_OOSEQ */
struct pbuf *refused_data; /* Data previously received but not yet taken by upper layer */
#if LWIP_CALLBACK_API || TCP_LISTEN_BACKLOG
struct tcp_pcb_listen* listener;
#endif /* LWIP_CALLBACK_API || TCP_LISTEN_BACKLOG */
#if LWIP_CALLBACK_API
/* Function to be called when more send buffer space is available. */
tcp_sent_fn sent;
/* Function to be called when (in-sequence) data has arrived. */
tcp_recv_fn recv;
/* Function to be called when a connection has been set up. */
tcp_connected_fn connected;
/* Function which is called periodically. */
tcp_poll_fn poll;
/* Function to be called whenever a fatal error occurs. */
tcp_err_fn errf;
#endif /* LWIP_CALLBACK_API */
#if LWIP_TCP_TIMESTAMPS
u32_t ts_lastacksent;
u32_t ts_recent;
#endif /* LWIP_TCP_TIMESTAMPS */
/* idle time before KEEPALIVE is sent */
u32_t keep_idle;
#if LWIP_TCP_KEEPALIVE
u32_t keep_intvl;
u32_t keep_cnt;
#endif /* LWIP_TCP_KEEPALIVE */
/* Persist timer counter */
u8_t persist_cnt;
/* Persist timer back-off */
u8_t persist_backoff;
/* KEEPALIVE counter */
u8_t keep_cnt_sent;
#if LWIP_WND_SCALE
u8_t snd_scale;
u8_t rcv_scale;
#endif
};
IP_PCB는 다음과 같다.
#define IP_PCB \
/* ip addresses in network byte order */ \
ip_addr_t local_ip; \
ip_addr_t remote_ip; \
/* Socket options */ \
u8_t so_options; \
/* Type Of Service */ \
u8_t tos; \
/* Time To Live */ \
u8_t ttl \
/* link layer address resolution hint */ \
IP_PCB_ADDRHINT
TCP_PCB_COMMON은 다음과 같다.
#define TCP_PCB_COMMON(type) \
type *next; /* for the linked list */ \
void *callback_arg; \
enum tcp_state state; /* TCP state */ \
u8_t prio; \
/* ports are in host byte order */ \
u16_t local_port
'컴퓨터 > 네트워크' 카테고리의 다른 글
lwIP 메인 함수 (STM32) (0) | 2022.10.08 |
---|---|
lwIP의 pbuf 변수 (0) | 2022.10.06 |
OSI 7 계층 모델 (1) | 2022.10.06 |
인터넷 프로토콜 종류 (0) | 2022.10.06 |
네트워크 소켓 프로그램 순서도 (0) | 2022.10.05 |
댓글